| Author |
|
Mazi
Super Poster
Joined: 29 November 2004
Online Status: Offline
Posts: 73
|
Hi,
The specs of this VoIP router does mention of its
support for SIP; therefore, this router should work with
the FreeWorld Dialup services. This prompted me to buy a
unit of this D-Link DVG-1402S VoIP router. However, I
don't see any VoIP setup under the setup menu of this
router, except I noticed a username/password is needed
to access the "Advanced" menu. So, I contacted D-Link
and got the response saying the username/password have
been set by Lingo. As I mentioned above, I only plan to
use this router's VoIP with the FreeWorld Diaup service.
So, I would appreciate if anyone out here can tell me
what the username/password to access for the "Advanced"
menu. That way, I can setup this router to use the
FreeWorld Dialup VoIP services.
Thanks.
--
Mazi
|
| Back to Top |
|
| |
Voip
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
Is there a way to unlock a packet 8 voice to internet adapter?
|
| Back to Top |
|
| |
WallyWatts
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
Works with Broadvoice & proabably any other SIP or MGCP vendor, but
sold locked to Lingo & AT&T. Requires admin logon to change
VOIP settings in advanced menu.
Admin logon
PrimusAdmin
password
tu7w3z39op4n
This for the current (winter 2004)Lingo version, firmware
L4.0S34 boot rom L4.0B03 at least. CSR didn't ask about my version, so
pass should work on all. D-Link will probably change with firmware
update if it becomes too popular. Please note successes or failures
with particular versions in comments. Include vendor, (att lingo etc.)
& firmware & boot prom rev from main page.)
|
| Back to Top |
|
| |
Mazi
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
Hi WallyWatts,
The username/password you gave here works great on my DVG-1402S VoIP
router that I bought from Fry's Electronics in Nov 2004. Now that I
have it unlock, it's time to figure out how to use this unit with FWD.
If anyone has any information to reprogram this unit to work with FWD,
please let me know.
Thanks.
--
Mazi
|
| Back to Top |
|
| |
Mazi
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
OK, after fiddling a couple of hours, I finally got my DLink DVG-1402S
VoIP router workiing with FWD. Right now, some friends can call me from
his telephone through a local SIP gateway to my unit and the sound
quality is good and clean.
--
Mazi
|
| Back to Top |
|
| |
romanr
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
I just order line from Lingo with Tokyo number.
I have already all information like phone number, account id, and web login password.
Somebody could provide here - information about servers/gateways of
Lingo that I will able to use this information to configure my Asterisk
use this line. I actually do not need the DLINK device that they send!
|
| Back to Top |
|
| |
Mazi
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
If the device sent to U from Lingo is a DLink DVG-1402S router, all U need is to use the username/password posted by WallyWatts here to access the advanced menu to find the information U need.
Otherwise, please let me know through e-mail and I will try my best to
help you out by resetting my DVG-1402S VoIP router to look for the
information U need. At the momemt, my DVG-1402S VoIP router has already
been reprogrammed with FWD information and only a hardware reset will
over write the current setup to a factory default setup.
--
Mazilo at msn dt com
|
| Back to Top |
|
| |
Talat
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
What will be the user name and password of Quintum AXM800. If we forgot the password. and There is no chnace for factory reset without password. If anybody know the method then also mail me on talat@biznas.com
Thanks.
Talat
|
| Back to Top |
|
| |
Mazi
Super Poster
Joined: 29 November 2004
Online Status: Offline
Posts: 73
|
If you want to find out the username/password for your Quintum AXM800
device, you will get a better chance by posting with a new
subject/title that reflects your device name/model, i.e. "Need username/password to unlock Quintum AXM800 VoIP device".
Until then, perhaps only people who are interested in DLink DVG-1402S
VoIP router username/password will read the beginining of this post. I
did ask for the username/password for my DLink DVG-1402S VoIP router in
one of the posts and did not get any response until I open a new post
here.
I hope this helps you out.
--
Mazi
|
| Back to Top |
|
| |
JB
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
Can a DLink DVG-1402S router be modified to work with Vonage?
Using Advanced login username/password, can Vonage be slected at the service provider?
JB...
|
| Back to Top |
|
| |
Mazi
Super Poster
Joined: 29 November 2004
Online Status: Offline
Posts: 73
|
AFAIK, most SIP router/IP phones, including DVG-1402S, should work
without any problem with any VoIP ISP (VoSP) that supports SIP. All you
need is to call Vonage and tell them you already have the DVG-1402S
VoIP router and would like to use it with a new account.
From time to time, your local Circuit City, CompUSA, or BestBuy store carries a new Vonage VoIP
package which comes with the hardware and sometimes it is FREE after
rebates and activation. That way, you can spare your DVG-1402S VoIP router to run other FREE SIP, i.e. FWD.
|
| Back to Top |
|
| |
romanr
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
Somebody can provide what info need to be written in
DLINK configuration:
Authentication Username
Authentication Password
I don't need to know the actual details but if the USERNAME is (account number/phone number/account login/completely different).
Password - what is password is same for web access password or pin code for voice mail?
Could you please advice for this?
|
| Back to Top |
|
| |
Mazi
Super Poster
Joined: 29 November 2004
Online Status: Offline
Posts: 73
|
Romanr,
What model of DLink VoIP device do you have? If you have the same as
mine, DVG-1402S VoIP router, the username/password are shown in this
post.
|
| Back to Top |
|
| |
romanr
VoIP and Call Center Guest Group
Joined: 01 December 2003
Online Status: Online
Posts: 3138
|
I still do not have the device, I need information what lingo put there in these fields.
I need to know it for connect my asterisk pbx to lingo, this
information i got by email fron lingo. Which i should use in devlice in
( Authentication Username and Authentication Password) fields?
Thank you for your recent order from Lingo.com. You should receive your
Lingo equipment and start-up kit in 3-5 business days. Please keep this
important email for your records.
Order Date: 1/04/2005
Account Number: 837XXXXX
Lingo Number: 813XXXXXXXX
Web Username: mywebusername
Web Password: *******
Voicemail access number: 1234
Voicemail pass code: 4321
|
| Back to Top |
|
| |
INDUSTRIES
Activate Email 
Active Forum Topics
Forum Memberlist
Forum Help
Forum Register
Forum Login
Topic:
Topic Closed)
